Introduction of Alligator shear

Alligator shears are called crocodile shears, which are named for their crocodile-like shape. They are widely used in metal recycling companies, scrap steel factories, and smelting enterprises. The alligator shears can cold-cut scrap metal structures with different cross-sectional shapes and process them into qualified furnace materials.

In general, alligator shears are more suitable for personal scrap metal recycling stations. The alligator shearing machine is equipped with an integrated electromagnetic valve device for rapid pressure regulation, which can cut about 8-9 times a minute, and the shearing speed is twice as high as the original one.

Features of crocodile shears

• Adopt hydraulic drive, easy to operate and easy to repair.
• Working blade length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, 8 levels of shear force from 63 tons to 400 tons. The shearing machine with a knife edge of more than 700mm is suitable for cutting scrapped cars.
• The installation does not need anchor screws, and the diesel engine can be used as power in places without power supply.
• The alligator shear adopts hydraulic transmission. Compared with the mechanical transmission shearing machine, it has the advantages of small size, light weight, low inertia, low noise, stable movement, convenient operation, sensitivity, large cutting section, and convenient adjustment of the scissors. It is safe to operate and use, and it is easy to realize overload protection.

Precautions for using crocodile shears

• The crocodile shears must be filled with oil before each shift, and the places with butter nozzles must be buttered.
• It is strictly forbidden for non-designated personnel to operate the crocodile shears, and it is necessary to stop the machine without people.
• Regularly check the travel switch, solenoid valve connector, and hydraulic oil on the back of the crocodile shears.